PE Annexin V Apoptosis Detection Kit with 7-AAD
产品: PE Annexin V Apoptosis Detection Kit with 7-AAD
货号: KF1014
来源: Synthetic
应用: FACS
   规格 价格 库存
 25tests RMB¥ 1000 现货
 100tests RMB¥ 2500 现货

货期: 当天发货

联系销售
相关下载

产品描述

货号:
KF1014
简介:
The Affinity Biosciences PE Annexin V Apoptosis Detection Kit with 7-AAD contains the reagents needed identify apoptotic or necrotic cells by flow cytometry.
储存条件:
2-8°C protected from light

PE Annexin V Apoptosis Detection Kit with 7-AAD

Catalog Number: KF1014

Introduction

The Affinity Biosciences PE Annexin V Apoptosis Detection Kit with 7-AAD contains the reagents needed identify apoptotic or necrotic cells by flow cytometry.

Kit Components

Components

Size

PE Annexin V

25/100 tests

7-AAD

200 tests

Annexin V Binding Buffer (1X)

50 ml


PE Annexin V

PRODUCT INFORMATION

Concentration: 5µl/test

Use By: 12 months from date of receipt

Storage Conditions: 2-8°C protected from light

Formulation: 10 mM HEPES, 140 mM NaCl, 1mM EDTA,

0.09% NaN3 pH7.4

DESCRIPTION

Annexin V belongs to the annexin family of calcium-dependent phospholipid binding proteins and has a high affinity for phosphatidylserine (PS). One of the characteristic features of early stage apoptosis is the translocation of PS from the inner to the outer leaflet of the plasma membrane, exposing it to the extracellular environment where it can be detected. Fluorochrome conjugated Annexin V can serve as a sensitive detection probe for this hallmark of early stage apoptotic change.

Annexin V is generally used in combination with a viability dye, such as 7-AAD or propidium iodide (PI), that cannot pass through intact cellular membranes. Translocation of PS occurs prior to loss of membrane integrity, therefore viability dyes would be excluded from the cell. As cells progress through the apoptotic process, membranes are compromised and the viability dyes are able to enter the cell. Using this method, cells that are Annexin V positive and viability dye negative are in early apoptosis. If cells are positive for both Annexin V and the viability dye, they are either undergoing apoptotic death or necrosis. When negative for both markers, cells are viable.

PREPARATION & STORAGE

Annexin V was conjugated under optimal conditions, with unreacted dye removed from the preparation. It is recommended to store the product undiluted at 4°C, and protected from prolonged exposure to light. Do not freeze.

APPLICATION NOTES

This Annexin V preparation has been pre-titrated and quality-tested for flow cytometry using mouse thymocytes cultured overnight in the presence of dexamethasone to induce apoptosis. The Annexin V conjugate has been diluted for use at 5 uL per test, defined as the amount of protein that will stain a cell sample in a final volume of approximately 100 uL. The number of cells within a sample should be determined empirically, but typically ranges between 1x10e5 to 1x10e7 cells.


7-AAD

PRODUCT INFORMATION

Excitation Laser Blue (488 nm), Green (532 nm), Yellow-Green (561 nm)

Emission (nm): 647

Formulation: 10 mM NaH2PO4, 150 mM NaCl, 0.09% NaN3, pH 7.2

Storage Conditions: 2-8°C protected from light

Use by: 12 months from date of receipt

DESCRIPTION

7-AAD (7-Aminoactinomycin D) is a nucleic acid dye that can be used to exclude nonviable cells from the analysis of flow cytometry data.

PREPARATION & STORAGE

7-AAD is provided in solution and should be stored at 2-8°C and protected from light. Do not freeze. CAUTION: 7-AAD is a potential carcinogen. Protect skin and eyes by wearing suitable protective clothing, gloves and eye/face protection.

APPLICATION NOTES

7-AAD is useful as a viability probe for exclusion of nonviable cells based on light scatter and fluorescence properties. It is recommend- ed to use 5 uL (0.25 ug) of 7-AAD solution per sample and incubate for 5-10 minutes in the dark prior to data acquisition.


Annexin V Binding Buffer (1X)

PRODUCT INFORMATION

Contents: Annexin V Binding Buffer (1X)

Use By: 6 months from date of receipt

Storage Conditions: 2-8°C

Formulation: Annexin V Binding Buffer (1X) contains HEPES, NaCl and CaCl2.

DESCRIPTION

Annexin V Binding Buffer is formulated to facilitate the binding of Annexin V conjugates to phosphatidylserine for subsequent analysis by flow cytometry. This buffer is supplied as a 1X solution and requires no manipulation prior to use.

PREPARATION & STORAGE

Annexin V Binding Buffer (1X) is supplied as a 1X solution and requires no manipulation prior to use.

APPLICATION NOTES

Annexin V Binding Buffer (1X) is recommended for use with Annexin V reagents. Cells should be resuspended in Annexin V Binding Buffer (1X) prior to incubation with Annexin V reagents.

限制条款

产品的规格、报价、验证数据请以官网为准,官网链接:www.affbiotech.com | www.affbiotech.cn(简体中文)| www.affbiotech.jp(日本語)

产品的数据信息为Affinity所有,未经授权不得收集Affinity官网数据或资料用于商业用途,对抄袭产品数据的行为我们将保留诉诸法律的权利。

产品相关数据会因产品批次、产品检测情况随时调整,如您已订购该产品,请以订购时随货说明书为准,否则请以官网内容为准,官网内容有改动时恕不另行通知。

Affinity保证所销售产品均经过严格质量检测。如您购买的商品在规定时间内出现问题需要售后时,请您在Affinity官方渠道提交售后申请。

产品仅供科学研究使用。不用于诊断和治疗。 

产品未经授权不得转售。

Affinity Biosciences将不会对在使用我们的产品时可能发生的专利侵权或其他侵权行为负责。Affinity Biosciences, Affinity Biosciences标志和所有其他商标所有权归Affinity Biosciences LTD.